• NewFC is now officially an archive. Please go to FuckCombustion for more information. If you have an account there, use it. If you changed your account name when you registered here, use your FC account. If you did not have an FC account, please register one. Thanks to everyone for their patience.

Cheap High Quality Bubbler

(still haven’t figured out how to @ you abysmal)
That seems like you would need several hands - way more coordination that I could ever muster after the first hit.
But I’d love to see a video of someone far more talented using it with multiple vapes!
:D I dont think it is possible to @ even if you type it right, i guess the tagging engine doesnt detect such symbols .For now i am not finding it a problem,cause i am getting alerts that they are more post after mine. Maybe if someone want to call my attention to a thread i havent posted in ,then it might be an obstacle.
Well i can easily imagine using it with 3 of my DIY glass ball logs and maybe plugging the two other ones :)),that being said i've never found the need at using more than one vaporizers at the same time, i have only very powerful ones,which i load only with tiny ammounts otherwise i am going to from inside :)).
Another use that comes to mind ,remove the stems and put a few whips/moutpieces ,and it can become a multi user experience. You can have 4 people sucking at 1 vape or 3 people at 2 ,etc.. :))
If i had this peace i would be usign it as j-hook. 4 plugs in 4 of the Gongs and the the vapebowl at the most distant bowl and the belly filled with water halfway :)).
 
/\β'/5/\/\ɐ|_ \//\|0[ ]®,
  • Like
Reactions: Jill NYC

invertedisdead

Gem Stoner
Messages
126
Location
Ye Olde FC

Aeownz

Storz & Bickel fanboi
Messages
14
Location
LONDON
Look what showed up today!? 14mm from Amazon and I've got an 18mm version coming from dhgate, too. I wanted something small and simple to use dry.
How's the setup (Delta3D silicone WPA?) treating you? I've wanted to get into some "waterworks" with my Mighty and that looks like a good bit of kit.
 

Moses Baca

Well-known Member
Messages
34
How's the setup (Delta3D silicone WPA?) treating you? I've wanted to get into some "waterworks" with my Mighty and that looks like a good bit of kit.
The D3D wpa works great, I prefer it to the glass one from PIU. Lots of recommendations for it in the Mighty thread, check it out.

Adding to my dry glass collection, my j-hooks arrived today, ordered on dhgate 04/11. They're my first j-hooks so I got one 14mm and one 18mm to compare. Back and forth on one cap with my Mighty, initial impression is the 14mm is more of a 'sipper' and the 18mm gets bigger hits easier. More research is definitely needed.

 

Vapeyvaporson

Well-known Member
Messages
79
Lol, Grav is a company that imports China glass and marks it up by $60, nothing classy aboot it.
Well damn, shows you what a green screen, a shiny filter, some sexy music and 3 min can do for ya I guess lol.
I have a glass blower local to me that my friends is good buddies with. He said he doesn’t do bubblers but maybe I’ll keep buggin him
 

Easywider

Gone till tomorrow
Messages
30
Location
Canada
Lol, Grav is a company that imports China glass and marks it up by $60, nothing classy about it.
By classy, I was referring to the fact this bubbler could be mistaken for a Crystal Vase or a Wine Decanter. Yes, a common business practice is for companies to purchase from China and mark up goods for re-sale. I would love to see more "Cheap high quality" Classy glass options, in general.
 

FlyingLow

Well-known Member
Messages
156
I have mentioned before, perhaps in the old thread, but I really do not mind buying from resellers. Frankly with the new DHGate pricing structure and shipping costs, you may be competitive now in pricing with a reseller.

IME with DHGate, I got shit pieces, crappy joints, poor quality control all around, and on one order the seller did NOT honor their own promotions and I had to settle through disputes.

When I've purchased from resellers, either locally or online, I do pay a little more but all that headache is gone. Resellers tend to cherry pick the higher quality pieces and I know what I am getting. Its my assumption that the shit we buy 1 unit at a time on DHGate is most certainly the factory seconds that are of a lesser quality [sometimes not so bad, other times complete garbage].

YMMV~ but I support the resellers!
 

invertedisdead

Gem Stoner
Messages
126
Location
Ye Olde FC
IME with DHGate, I got shit pieces, crappy joints, poor quality control all around, and on one order the seller did NOT honor their own promotions and I had to settle through disputes.
Totally agree, I’ve been done with the Gate for a while. I continually have found better glass in local head shops where the quality of the piece I’m buying can be evaluated before purchase.

This isn’t the thread for it, but honestly as a community I think we need to take a big step back from knock off glass. We wouldn’t support knock off Dynavaps or Simrells, Tinymights nor Lamarts. These glass blowers are an integral part of our beloved cannabis community who we’ve frankly left out to dry by allowing so many of their designs to be knocked off and sold right out from under them.
 

CybrGuy

Wear a Mask
Messages
238
I get your concerns, but without DHGate and similar sources I would have very little glass. I don't support and would not buy labeled knockoff glass that is pretending to be from the original creator, but I have no problem with copies. Nobody is going to mistake my Steven or Yingmin5 or Sunshine Store glass for the original vendors. For the most part they aren't even close. They may (I hope) function well, but their fit and finish is not on the same level.
 

FlyingLow

Well-known Member
Messages
156
They may (I hope) function well, but their fit and finish is not on the same level.
Function has to be taken into considerationl. You may think something performs well, based on your experience... but if you have never hit a real Mobius or SeedOfLife perc, then you really don't know what you are missing. Sure the knockoffs look close, but a lopsided perc from Yingmin5 is never going to fire as even and as smoothly as the Real Thing.
 

rebar

Well-known Member
Messages
71
Location
Montana
I have high end custom glass and and a shit ton of Dhgate glass.
I break a bit of it and use it hard so I buy multiple China pieces if I like a design.
Wide quality variation but when I can literally get ten units for half the price and I know breakage is the ultimate end,I definitely go Chinese for 99% of my purchases.
 

CybrGuy

Wear a Mask
Messages
238
Function has to be taken into considerationl. You may think something performs well, based on your experience... but if you have never hit a real Mobius or SeedOfLife perc, then you really don't know what you are missing. Sure the knockoffs look close, but a lopsided perc from Yingmin5 is never going to fire as even and as smoothly as the Real Thing.
Oh, I absolutely agree that the performance in most cases of the knockoffs won't be as good, maybe not even close to the original makers. But that is really the point. I am willing to accept the lower quality for the lower price. If I had to pay $500 for my Mobius I just wouldn't be able to have it. The Chinese vendors make it possible for me to own interesting and functional (even if less so) glass to enjoy. As long as they aren't pretending to be Mobius I have no problem with it.
 
Top Bottom