• NewFC is now officially an archive. Please go to FuckCombustion for more information. If you have an account there, use it. If you changed your account name when you registered here, use your FC account. If you did not have an FC account, please register one. Thanks to everyone for their patience.

DynaVap VapCap

TommyDee

Well-known Member
Messages
386
No, but the messege I got from it was that torching items shortens the operating life of CCDs and presumably that would extend to the coil as well. :unsure:

Also George mentioned that the reason why they don't recommend immersing your cap in cleaning solution, is because some solution might dry on the clicker discs in the cap and possibly affect the temperature that they click at.

I think that was in reference to soap or detergents more than alcohol(which burns off cleaner)

Happy vape o'clock everyone. :spliff:
Funny, to clean off the Moad Dib, I just glow the screen red and no more whisps of smoke. Perfectly clean once the hooks get hot. No mess, No fuss :cool:

@Duba - about 5" of a wooden stem is enough for the vape path to cool significantly. This is a straight as a straight vape path gets so nothing is condensing your vape either. Win-win.
 

Thunderstealer1337

Well-known Member
Messages
65
fml, just bought a nonavong off entexchange

and now dynavap is doing a 20% off deal end of month to 4th of july

oh well, i knew i shoulda just waited for big sale/holidays - i woudla done a huge order via dynavap and i heard they give you all sorts of bonus stuff with your order
 

LabPong

Well-known Member
Messages
157
Location
Earth
I’ll add what I DON’T recommend. The Dynavap “BB9” glass stem with beads with 14mm WP end.
After the first few uses, the 9 little balls collect the sticky vapor, and no longer move at all. I like the rest, but unless you ISO clean it OFTEN, might as well own one without the balls. They might offer a bit of extra cooling while clean and moving, but as soon as they get stuck, the balls probably just add draw resistance.
Actually...it is a 10mm/14mm male joint. But yes....the balls will stick together......which is why they are beads with the holes and not solid pearls.

If you are using a BB9 with a M tip of any kind....yea I would think its going to feel restricted. I only use the Ti tips and have 0 issues with any draw resistance. But the purpose is not to have the balls freely bouncing around...they are used for extra cooling surface only! The holes in them help to alleviate resistance after your first or more bowls cause them to stick.

You could say they are also for determining how good your flower is......lol
 

Thunderstealer1337

Well-known Member
Messages
65
I thought george mentioned to clean the bb9 once the blueballs stick.

There is some rainstick ritual feeling he talks about, and that can only be when the balls are still loose.

Lol, this was the main reason i never got one, cuz ppl complained it gunks up to fast
 

RustyOldNail

Well-known Member
Messages
96
Actually...it is a 10mm/14mm male joint. But yes....the balls will stick together......which is why they are beads with the holes and not solid pearls.

If you are using a BB9 with a M tip of any kind....yea I would think its going to feel restricted. I only use the Ti tips and have 0 issues with any draw resistance. But the purpose is not to have the balls freely bouncing around...they are used for extra cooling surface only! The holes in them help to alleviate resistance after your first or more bowls cause them to stick.

You could say they are also for determining how good your flower is......lol
“The holes in them help to alleviate resistance after your first or more bowls cause them to stick.”
Didn’t know the balls had holes in them, regardless if that was the design then I say: FAIL
On my BB9 I use the 20m SS tip, through water, draw resistance not an issue.
They do STICK and in some cases get STUCK, if you like them free flowing you would have to clean it after every few uses. My original post and complaint stands.
 

Ganjora

Member
Messages
18
Location
Randburg
the decline in efficiency and performance is so gradual, that even the hit just before your device finally clogs is still acceptable.
once you've deep cleaned, and fill that chamber, it's wonderful to remember: damn, little bat hits hard!
 

notams

chant down Babylon
Messages
62
Location
Pueblo, CO
Fun IH game:

Try to do a 1 click bowel. Do just 1 heat up click and continue to puff, heat, puff, heat, etc. Until you've depleted everything from that bowel. Never let it cool down enough to click until you're done. You only get one cool down click per bowel. Dark brown AVB. My goal tonight was ex-trac-tion. So, I was going for really dark AVB.

I've been crushing it tonight.
 
Last edited:

TommyDee

Well-known Member
Messages
386
All this IH work I've been doing is all about keeping the heat on just as you described. Why put the torch down when you just got things cooking? Just extract all that vape while you got the momentum going.
 

LabPong

Well-known Member
Messages
157
Location
Earth
“The holes in them help to alleviate resistance after your first or more bowls cause them to stick.”
Didn’t know the balls had holes in them, regardless if that was the design then I say: FAIL
On my BB9 I use the 20m SS tip, through water, draw resistance not an issue.
They do STICK and in some cases get STUCK, if you like them free flowing you would have to clean it after every few uses. My original post and complaint stands.
My main point about the BB9 balls/beads.....is that I can do a test with one stem that has all the beads stuck in place....then one with no sticking from being freshly cleaned.....and you will not be able to tell which one is which in a blind taste test.........which is what I did a couple times.

I mean......when you use a stem that does not have balls in them....or other moving parts......it gets gunked up right? Can you tell the diff from fresh clean and then used maybe 3-5 times? Try the test if you have the same stems and tips to use back to back.

So to think that the design of the BB9 is a fail......and you have not even used one...... :cool:
 

Moses Baca

Well-known Member
Messages
34
Fun IH game:

Try to do a 1 click bowel. Do just 1 heat up click and continue to puff, heat, puff, heat, etc. Until you've depleted everything from that bowel. Never let it cool down enough to click until you're done. You only get one cool down click per bowel. Dark brown AVB. My goal tonight was ex-trac-tion. So, I was going for really dark AVB.

I've been crushing it tonight.
You've discovered dip and sip, I love it, too. I first saw PP doing it in one of his videos awhile back.

 

RustyOldNail

Well-known Member
Messages
96
My main point about the BB9 balls/beads.....is that I can do a test with one stem that has all the beads stuck in place....then one with no sticking from being freshly cleaned.....and you will not be able to tell which one is which in a blind taste test.........which is what I did a couple times.

I mean......when you use a stem that does not have balls in them....or other moving parts......it gets gunked up right? Can you tell the diff from fresh clean and then used maybe 3-5 times? Try the test if you have the same stems and tips to use back to back.

So to think that the design of the BB9 is a fail......and you have not even used one...... :cool:
I own two BB9’s. So yes, I have USED them, and I can taste the difference when the balls get gunked up, more surface area in total.
 
RustyOldNail,

thejackalsmark

Just another "Person Of Interest"
Messages
10
Location
Michigan
Try to do a 1 click bowel. Until you've depleted everything from that bowel. You only get one cool down click per bowel. Dark brown AVB. My goal tonight was ex-trac-tion. So, I was going for really dark AVB.
I've been crushing it tonight.
With you crushing that "Bowel", I'll bet you really ARE getting "Dark Brown" abv! :rofl:

(Sorry, guys. The 12 year old in me HAD to. ) :nod: :lol:

Happy Vaping! :leaf:
 

BabyFacedFinster

Capo di tutt'i capi
Messages
65
@Moses Baca Dip and sip! Love it! Perfect name. Dang, it's fun.
I usually prefer a slower session with a dynavap so I tend to follow the clicks at first.

I find dip n sip helpful near the end of a bowl when I want to get through it and repack another.

After a while you get to know your tip and can anticipate the level of roast based on how long your heating it. It becomes intuitive.
 

Whatitdew

New Member
Messages
3
The D-Capper Debowler by GFL is the truth! Loving this new vapcap accessory. A missing piece to my setup puzzle

also I got a vaphotbox recently and it is really good. Replaced my PortsideMini. Less aggressive, more even heating and really good battery life! Just not a fan of having an ABS enclosure, would rather have something more rugged.

simrell vortex with ti tip my most used vapcap right now, might sell the shorty. Not feeling it like the XL size.

also successfully gave away two M’s to a first time dynavaper and to another friend!
 

notams

chant down Babylon
Messages
62
Location
Pueblo, CO
With you crushing that "Bowel", I'll bet you really ARE getting "Dark Brown" abv! :rofl:

(Sorry, guys. The 12 year old in me HAD to. ) :nod: :lol:

Happy Vaping! :leaf:
God. I just NOW got that. Read it yesterday. Scratched my head. Then - just this morning - Damn. English is the strangest language. One little letter and... That happens. Good catch, Jackal.
 
Top Bottom