• NewFC is now officially an archive. Please go to FuckCombustion for more information. If you have an account there, use it. If you changed your account name when you registered here, use your FC account. If you did not have an FC account, please register one. Thanks to everyone for their patience.

NewVape - TBucket Banger System

elmomuzz

New Member
Messages
3
Pearls don’t work as good as you think. Being round they only make contact with the dish at a single point. So they never get nearly as hot as the dish. They cool the dab.
 

ResidentAutist

New Member
Messages
8
Well damn, I feel like a bit of a fool for getting two sets now. I suppose I'll play around with them some to see if any differences are noticeable, but it sounds like I made an oopsie. They'll be here Monday, anyway. :uhoh:
 
ResidentAutist,
  • Like
Reactions: EmDeemo

EmDeemo

A little horse
Messages
126
Well damn, I feel like a bit of a fool for getting two sets now. I suppose I'll play around with them some to see if any differences are noticeable, but it sounds like I made an oopsie. They'll be here Monday, anyway. :uhoh:
You might like em! I think @nspatient does!

I dont personally, I find them to be a bit of a pain and unnecessary in the TBucket, but I gave it a go I think?

EDIT: Finally got a nice amount of concentrates in the house. Finally back to using boost mode. Its been a while. Decent size dab, starting at 500f (controller temp), and boosting to 650. The controller starts slowing the climb at around 600 and really slows down around 630. Rarely does the dab last long enough to get much higher in temp. A couple of decent hits at 500, so full of flavour, and then all the vapour and big hits once I hit the button and start the temp increase.

I am starting to approve of the boost mode. I didnt think I'd want to use the other two boost mode memory slots but I think I might now.
 
Last edited:

EmDeemo

A little horse
Messages
126
I am slightly refining my method, dropping my boost settings to 460f start temp, boosting up to 600. I was finding that too high a boost temp and too little a dab was too easily a predicament, making clean up more difficult with a dried out/crusty dirty dish.

Dropping the temps means my margin of error is reduced and I have more time to clean up in case I forget what the hell I'm doing mid dab :)

Also, with a different size dab, hitting the boost button at different times during the dab - for instance, a large dab, maybe boosting the temp before the dab has hit the dish, or with a small dab, leaving it till the very end/at the start of the inhale, just to get the last bit/best bit ;)

EDIT: And once I can see the dab is drying out, getting all thick in the dish and about to stop giving off the goods, I hit the button to drop temps again and ensure clean up will stay easier for longer.

Boost mode is really handy.
 
Last edited:

VaporScript

New Member
Messages
8
I am slightly refining my method, dropping my boost settings to 460f start temp, boosting up to 600. I was finding that too high a boost temp and too little a dab was too easily a predicament, making clean up more difficult with a dried out/crusty dirty dish.

Dropping the temps means my margin of error is reduced and I have more time to clean up in case I forget what the hell I'm doing mid dab :)

Also, with a different size dab, hitting the boost button at different times during the dab - for instance, a large dab, maybe boosting the temp before the dab has hit the dish, or with a small dab, leaving it till the very end/at the start of the inhale, just to get the last bit/best bit ;)

EDIT: And once I can see the dab is drying out, getting all thick in the dish and about to stop giving off the goods, I hit the button to drop temps again and ensure clean up will stay easier for longer.

Boost mode is really handy.
Our resident FC Scientist hard at work! (Just what I have been waiting for, so I can get my technique and settings dialed in -thanks!)
 

ResidentAutist

New Member
Messages
8
Agreed, very useful info! I'm wondering if there's a way to get similar boost-mode functionality out of the NV controller in my Tsunami. Great to see Auber add that.
 
ResidentAutist,

EmDeemo

A little horse
Messages
126
Agreed, very useful info! I'm wondering if there's a way to get similar boost-mode functionality out of the NV controller in my Tsunami. Great to see Auber add that.
This is why I started asking Auber to add it. I was doing boost mode by just upping the temp a bit haphazardly on the NV/Vapecode controller. Less than ideal, but it worked and started me down this path.
 
EmDeemo,
Top Bottom