• NewFC is now officially an archive. Please go to FuckCombustion for more information. If you have an account there, use it. If you changed your account name when you registered here, use your FC account. If you did not have an FC account, please register one. Thanks to everyone for their patience.

The Mighty by Storz & Bickel

Green Kiwi

Member
Messages
18
Location
New Zealand,Aotearoa
Soo, it seams to me a lot of people use their Iso warm/hot?:sherlock:?(for cleaning purposes)
I never have, always just roomtemprature.
Could it be that this is what could possibly affect the hologram?:thinker:.And is it necessary?because with my long times soaked it cleans up "clean as a whistle".Always.
I see a slight difference in color between my first C.U. compared to ,say the newest ones I have.soo 6 years(almost)of usage has discoloured it slightly.
but by no means is it damaged.
@blissfulyogi , yeah my used iso has that typical "yuck" smell, I'm always surprised when I vape it (in a capsule sandwiched between the herb)that it doesn't taste like that smell, it tastes Okay, not yummy like fresh concentrate, but good enough for me.:tinfoil:.(last thing could it be that hot iso makes the C.U. brittle ?:popcorn:).
 
Last edited:

blissfulyogi

Member
Messages
33
Absolutely, it destroyed the holograms, not warm iso, but very hot iso, I was in a hurry I know, stupidity,
I see substantial difference when compared the old mighty which should be from 2017 already new model and newest model I received, Im wondering if its just oily or if they used some new finish or material on the new mighty, since it seems matte in color. Thats strange, I have been probably poisoning myself with denaturized iso, this shit smells awfully similar to it and when vaped the subtle smell of it still there. I think it could make the cu brittle, not sure but hopefully I didnt ruined all the CUs I have been cleaning.

BTW where is the mighty +? I remember when such a hype was created probably in 2018 on old fc :D
 

blissfulyogi

Member
Messages
33
Hope someone from SB reads it but that gold foil sticker should be at least made from the same material, vinyl like the volcano stickers SB used to sell. How they want to people to rep them via stickers when they made subpar stickers which will fell of and fade soon, bad marketing bad idea on how to save on costumers.
 

vapviking

Old and In the Way
Messages
111
Location
USA
The soft universal wpa o r the one that attaches to where cu goes? How do you like? Any better recommendations? TIA
I happen to have the delta V3 wpa the smaller of the two that replace the cu, and I like it a lot.
Certain care has to be taken in use (silicone on glass is not as smooth as glass on glass).
 
vapviking,
  • Like
Reactions: DJSleepy

RustyOldNail

Well-known Member
Messages
96
Placed an order for Mighty accessories 1 month ago from their USA website (things not in stock in the online stores I normally use). 2 weeks later I emailed about any shipping updates, and was told they go out no later then 30 days from ordering, and now, 32 days later, I see a shipping LABEL has been created. Just updating this for those that have been asking about their shipping times.
 

blackstone

'claim Junkie
Messages
17
Now another question: Where the F..k is that Mighty +?
S&B, I'm talking to you guys, hurry up!:pbbt:
Just remember, we are all in this together hahaha!:lol::D

Im wondering about the mighty + too was it just a hype created by us? :D
Without wanting to create unnecessary hype, I arrived at some conclusions:
1) They should really have to, at some stage, offer the same free one year extension of warranty to total three years on their flagship portable Mighty, like they already offer on the Crafty+ now.
Has anybody got a new S&B+ 'scan to register' card with a regular Mighty yet?

2) They pretty much have to make the Mighty heat time a little faster, because the less expensive, single cell Crafty+ is faster at heating than Mighty ATM.

3) They should also offer a similar improved housing material on Mighty like they do on the Crafty+ now.

4) It might be delayed, possibly because it would be unwise to offer international delivery of a new product in these times and back it up in case of problems.
I don't know how they could manufacture and assemble to full capacity during social distancing.
Or they can't decide if they should release Mighty+ or another new concept!
Or this is how they had it planned, to just wait a certain period after the anniversary gold Volcano Classic was released. That model was unexpected by most of us.

Hope someone from SB reads it but that gold foil sticker should be at least made from the same material, vinyl like the volcano stickers SB used to sell. How they want to people to rep them via stickers when they made subpar stickers which will fell of and fade soon, bad marketing bad idea on how to save on costumers.
You mean these really new gold 3d ones that they give out with a vape recently? They kinda remind me of "fancy stickers" from the early 80s or like something from an Xmas card!
So they fall off easily? And probably don't do curved surfaces very well?

Placed an order for Mighty accessories 1 month ago from their USA website (things not in stock in the online stores I normally use). 2 weeks later I emailed about any shipping updates, and was told they go out no later then 30 days from ordering, and now, 32 days later, I see a shipping LABEL has been created. Just updating this for those that have been asking about their shipping times.
Wow, I'm in EU but not mainland, I ordered accessories on Thursday 4th June and recieved Tuesday the 9th!
Either they are just catching up or it pays to live here just now.
Hope Oakland is back up and running soon for all you over there.
(I did notice notes on some items that there could be delays with new stock etc. But it did not seem to affect me)
 

vapviking

Old and In the Way
Messages
111
Location
USA
Not as smooth meaning gets stuck? They say to twist out does that work?
No, not stuck tight, a little twist works. Occasionally (like, if my wife is 'helping', it will detatch from Mjghty and stay loosely stuck in the glass, but this by design. The joint is flexible enough to sacrifice itself rather than risk damage to Mighty's housing. Screwing back on is no hassle since the silicone does not really get very hot.\

I put up with this quirk because I don't want to risk cracking Mighty housing, as I think one other wpa on the market can do.
 

DJSleepy

Member
Messages
34
Location
Locked down in the South.
No, not stuck tight, a little twist works. Occasionally (like, if my wife is 'helping', it will detatch from Mjghty and stay loosely stuck in the glass, but this by design. The joint is flexible enough to sacrifice itself rather than risk damage to Mighty's housing. Screwing back on is no hassle since the silicone does not really get very hot.\

I put up with this quirk because I don't want to risk cracking Mighty housing, as I think one other wpa on the market can do.
Thanks man ! Appreciate you. On my way to place order!
 

Chemdawg

New Member
Messages
10
I also have the delta v3 and it will get kinda stuck to the bong.
..I just use my finger to separate as I'm pulling the mighty away.

🤔
I should get an ash catcher style Bong with center 14-18mm (not off to side like typical bong slide placement) and maybe I could leave mighty upside-down. ?
Nice whip an I could sit back....:science:
 

vapviking

Old and In the Way
Messages
111
Location
USA
🤔
I should get an ash catcher style Bong with center 14-18mm (not off to side like typical bong slide placement) and maybe I could leave mighty upside-down. ?
Nice whip an I could sit back....:science:
Definitely, you can go hands-free, wife and I pass the whip, hookah style.
Long periods inverted (whether fully or not) may lead to some vapor drifting up into the internal vapor path, so maybe avoid really luxuriating in the bath with it on yer bong...
 

blissfulyogi

Member
Messages
33
Just remember, we are all in this together hahaha!:lol::D


Without wanting to create unnecessary hype, I arrived at some conclusions:
1) They should really have to, at some stage, offer the same free one year extension of warranty to total three years on their flagship portable Mighty, like they already offer on the Crafty+ now.
Has anybody got a new S&B+ 'scan to register' card with a regular Mighty yet?

2) They pretty much have to make the Mighty heat time a little faster, because the less expensive, single cell Crafty+ is faster at heating than Mighty ATM.

3) They should also offer a similar improved housing material on Mighty like they do on the Crafty+ now.

4) It might be delayed, possibly because it would be unwise to offer international delivery of a new product in these times and back it up in case of problems.
I don't know how they could manufacture and assemble to full capacity during social distancing.
Or they can't decide if they should release Mighty+ or another new concept!
Or this is how they had it planned, to just wait a certain period after the anniversary gold Volcano Classic was released. That model was unexpected by most of us.


You mean these really new gold 3d ones that they give out with a vape recently? They kinda remind me of "fancy stickers" from the early 80s or like something from an Xmas card!
So they fall off easily? And probably don't do curved surfaces very well?


Wow, I'm in EU but not mainland, I ordered accessories on Thursday 4th June and recieved Tuesday the 9th!
Either they are just catching up or it pays to live here just now.
Hope Oakland is back up and running soon for all you over there.
(I did notice notes on some items that there could be delays with new stock etc. But it did not seem to affect me)
very strange, not 3d in my case just a cheapo sticker with mighty, volcano and crafty and their logos in the middle.Three stickers on a gold foil, nothing much, not even thick vinyl , they seems really cheap compared to the 3d volcano sticker which have some 3d structure which pops out. Did you received different ones than me? I did not received any card for registering and the mighty is from the fall of 2019.
@Chemdawg Did you tried some vegetable oil on the joint?
edit : can somebody speak about the updated materials on crafty +? is it cracking less?
@vapviking any benefits of registering it ? +1year warranty should be there
 
Last edited:

DaboOZ

New Member
Messages
8
Location
Montréal
Hi
I received my Mighty 5 days ago, I used it only with capsules, I prefer to keep it clean ...
My opinion, even if many people have already done it, it is extraordinary!
See my vaporizer list, of all, it's the best in any category !
So high !
In a while I will buy a stainless steel cooling chamber.
(French Lab made a new version with new vapor path more cool...)

unite-de-refroidissement-pour-mighty-en-inox-v2-ftv.jpg
 

Jbm

Active Member
Messages
25
I think S&B has little impetus to produce a Mighty+ given that nobody can keep the current model in stock and people just keep buying them. On the other hand they could just be selling off current stock prior to the big reveal. I do think that when they do release a plus they’ll follow the Crafty+ practice and unbundle all the included accessories.
 

DJSleepy

Member
Messages
34
Location
Locked down in the South.
Hi
I received my Mighty 5 days ago, I used it only with capsules, I prefer to keep it clean ...
My opinion, even if many people have already done it, it is extraordinary!
See my vaporizer list, of all, it's the best in any category !
So high !
In a while I will buy a stainless steel cooling chamber.
(French Lab made a new version with new vapor path more cool...)

View attachment 1455
Wow where is that stainless steel cu from? I want ! I want !
 

RustyOldNail

Well-known Member
Messages
96
Wow where is that stainless steel cu from? I want ! I want !
Let us know what you think if you get one, seems this is a NEWER V2 version. The original did not get very good reviews from Troy (420vapezone), and a few other reviews I read. Costly, rough fit, no appreciable cooling difference, was what I remember, so I passed. Maybe new model addressed those issues?
 

SquirrelMaster

¯\_(ツ)_/¯
Messages
91
Location
Canada
Let us know what you think if you get one, seems this is a NEWER V2 version. The original did not get very good reviews from Troy (420vapezone), and a few other reviews I read. Costly, rough fit, no appreciable cooling difference, was what I remember, so I passed. Maybe new model addressed those issues?
What was the general consensus on it? I remember when @420_vapezone got his but I didn't hear what he thought of it.
 
SquirrelMaster,
  • Like
Reactions: jpdnkstr
Top Bottom