• NewFC is now officially an archive. Please go to FuckCombustion for more information. If you have an account there, use it. If you changed your account name when you registered here, use your FC account. If you did not have an FC account, please register one. Thanks to everyone for their patience.

VapeXhale Cloud EVO

mustacheemperor

New Member
Messages
3
don’t you guys remember the Hanu Stone
Per their website, "created by the team at Vapexhale – a vaporizer company whose products were consistently awarded best in the industry from 2012-2018 "

:( we still think you're the best, VXL. Please, just believe in yourselves

While we're talking about finding recreations of discontinued accessories, anyone have a good lead on where I could buy a hydrabase? Base+whip was my absolute favorite way to enjoy cannabis in any form, Evo included, and unfortunately mine had a ground-impact related death shortly after they were discontinued.
 

IM1RU12

Member
Messages
16
Great idea @macbill! Thx and a great community here.

.
@IM1RU12 That is a lot bigger than I use. I'm probably the exception, but I literally use a piece that is smaller than a cooked grain of rice.
Thx for sharing. It's interesting to compare and see what others are doing. Anyone else?

The rice grain size estimate is hard to nail down... there's many so different types and sizes of rice, then cooked/uncooked :doh:. It's why I posted a picture... and to discuss it. I'd guess the dab in that picture is about the size of an uncooked grain of long rice like basmati/jasmine; somewhat thicker, but not as long. Haha.

FWIW, I've done a similar dab size many times in the EVO (with the one-hitter method) and there's never been any significant spillover issues; the bamboo looks good. Don't draw too fast though...

:peace: :leaf:
 
Last edited:

Caliganja420

New Member
Messages
8
I switched to hot water PBW in an ultrasonic cleaner for my glass/ELBs, and that method cleans best in my experience.

This talks about the settings and methods I do for dabs. To avoid burnt toast flavors I try to do a dab in one hit... I called it the "one-hitter" settings/method. I often dab ~15-19 seconds into the timer now. I typically do a high temp burn off (near max) for 15-20 minutes in the EVO heater after every Vapexnail use in the first 2-4 dabs (depending on how dirty it gets). Then away it goes for a deep cleaning.

Good luck and let us know if you have any more questions and how it goes.


FWIW, I picked up a generic hydrafoot off of DHgate and it was far too small to use as a stable base. I never ended up using one. The ones that come with DHgate hydratubes are a good size though.


@Relaxed, how does the size of dabs you do in the VapeXnail compare to the picture I posted above? Anyone else? That was a good size for me... a cougher. How about others here? Do you go with more or less in dab size? I forgot to ask that before.


Wow on the EVO news, thx for sharing.

:peace: :leaf:
I also tried to do a one dab hit. After 2 dabs the nail was black as fuck , so I put it in the evo on the highest setting and it came out like new again. What’s the best temp for you? I understand you like considerably lower temps, but I just want to get high quick and extract as much oil as I can. I’m running it at 4 oclock, how’s that seem??
 

IM1RU12

Member
Messages
16
I also tried to do a one dab hit. After 2 dabs the nail was black as fuck , so I put it in the evo on the highest setting and it came out like new again. What’s the best temp for you? I understand you like considerably lower temps, but I just want to get high quick and extract as much oil as I can. I’m running it at 4 oclock, how’s that seem??
To get the best flavors and minimize toastiness, I've settled in dabbing at ~ 12:15-12:30 o'clock on the heater dial (~365 F) with the EVO. I haven't tried higher temps very much, and not as much I'd like to (I only dab 1-2 times a week)... when I did I was fighting toasty flavors. I find higher temps more tricky with the EVO to keep good flavors.

4 o'clock is ~ 450 F, so that seems reasonable... at least from many of the dab guides on the net. I've seen the 350 F - 450 F range often recommended and dabbing temps are about personal preference as much as anything. Is there a hold time for you at those settings before you dab (letting the concentrate sit for a bit with the nail in the heated EVO)?

I'd recommend trying different temps and see what you find out (plus let us know ;)). As mentioned before, as you go lower in EVO temp, the more (and longer) a hold time for the nail becomes helpful in vaporizing the dab in the EVO well.

AFAIK, most people low temp dab now-a-days. But what that means isn't very clear (the definition of "low temp dab" is all over the place with a Google search). I've seen it described as low as 300 F and as high a limit as 450 F or 500 F).


@CuckFumbustion, what temp do you dab using the EVO? Hold time?

:peace: :leaf:
 
Last edited:

CuckFumbustion

Lo and Behold! The transformative power of Vapor.
Messages
20
@CuckFumbustion, what temp do you dab using the EVO? Hold time?
FWIW I use CBD products. Usually at 12:15. As soon as I see a plume form, I feel that it is ready.
My nails do still get residue forming and I need to do burn offs . So maybe I need to try other temps as well. But also avoiding the scorched taste at the end. Still experimenting on a best method.
 
CuckFumbustion,
  • Like
Reactions: IM1RU12

IM1RU12

Member
Messages
16
FWIW I use CBD products. Usually at 12:15. As soon as I see a plume form, I feel that it is ready.
My nails do still get residue forming and I need to do burn offs . So maybe I need to try other temps as well. But also avoiding the scorched taste at the end. Still experimenting on a best method.
Thx. That's a similar temp to my use. If you find some improvements in method and/or temps, please share. Enjoy the CBD dabbing.

:peace: :leaf:
 
Last edited:

readyman

Member
Messages
37
Mod Note: Double post merged
This vape evo is why I dont need to light up my bong which is ready and waiting in the garage never have used it since I got my evo 5 months ago my method for me is basket with flower then kief with small wax ball about small dab size half grain of rice size and finish load with flower fill about 3 quarters of the basket turn heat up til 3 15 on the dial and rip 4 to 5 times on the Graphite P resicion H ydratube and I am as HIGH as the bong with same load did maybe the only difference for me is smoking gets you there a little faster but not enough for me to care I then clean the basket everytime I do it this way therefor FOR ME the evo is the closest vape for a Bong experience and the Plenty vape is the closest vape I Ihave for a CHILLIN smoking a DOOBIE on my front porch with friends experience Cantalk not sure your logo over here anyway I know you would get a kick out of this post buddy EVERYONE HAVE A GREAT WEEKEND

sorry forgot to ask anyone use a small grain of dab at 500 on the dial
 
Last edited by a moderator:

Delow317

New Member
Messages
3
What's up fellas, Socks and Sandals from the old forum here. Nice to see everyone loving their Evo's and experimenting with new new temps and new ways to use this Beast of a vaporizer! This is still my daily driver and has been since 2016 for the most part! After short stints with other vapes, I just keep coming back to this because it just gets me where I want to be faster, and hits much harder do to the water filtration.

I usually run my concentrates right at 350F, 12 on the dial now as that seems to be the sweet spot. Very long light pulls.. always a half of a grain of rice or smaller, rolled up into a ball (if soft shatter) and put in my quartz tube.. so neat and so sweet! This is also always were I start my herb (at noon) and just go up till 2 till done.
 

MinnBobber

Well-known Member
Messages
32
Anybody catch the VapeXhale virtual launch party ,
BRNR Lab is the new name?? I missed it.
?? I’m not sure if all of VXL is now BRNR or if it is separate??
Anyone know the real deal on this?
Inquiring minds want to know.
 

Delow317

New Member
Messages
3
I being absent for few months from this forum... family problems.
Now I'm back:Dand enjoying my new hydratube from vapefield , thanks to George:rockon: the best
View attachment 1836
Looks like Genuine XHL accessories to me! That was the old color Stonemonkey logo I had on my classic Hydrabomb before it broke. Nice find.. but is there any way to convert to USD? I don't think there is for those of us in the states.

On a side note, it's not just their Hydratubes and bases they discontinued.. it was many other things.. The silicone dab mat (which I use to place the Evo On), then they removed both of the Nail Buddys (one held 10, the other 5), they removed the stock normal dry mouthpiece for something that looks like.. well you know :dog:... the Calyx. Anyone remember anything else?

Oh wait... they did used to offer that lube for the glass joints and Rez block if you remember. My first Evo came with a Skillettools Branded Honeybun which they also used to offer on it's own before switching to a generic Honey bun tool.. I know there are more accessories they have discontinued since I got mine in the tail end of 15 but I can't remember.

Anyhow, unless they accept USD, I'll have to find an official base elsewhere. I'm not a fan of DH Gate or cheap china glass.
 
Last edited:
Delow317,

magictorrent

New Member
Messages
3
Looks like Genuine XHL accessories to me! That was the old color Stonemonkey logo I had on my classic Hydrabomb before it broke. Nice find.. but is there any way to convert to USD? I don't think there is for those of us in the states.

On a side note, it's not just their Hydratubes and bases they discontinued.. it was many other things.. The silicone dab mat (which I use to place the Evo On), then they removed both of the Nail Buddys (one held 10, the other 5), they removed the stock normal dry mouthpiece for something that looks like.. well you know :dog:... the Calyx. Anyone remember anything else?

Oh wait... they did used to offer that lube for the glass joints and Rez block if you remember. My first Evo came with a Skillettools Branded Honeybun which they also used to offer on it's own before switching to a generic Honey bun tool.. I know there are more accessories they have discontinued since I got mine in the tail end of 15 but I can't remember.

Anyhow, unless they accept USD, I'll have to find an official base elsewhere. I'm not a fan of DH Gate or cheap china glass.
You can ask to vapefield what they can do for you or I can buy one and send it from Spain for you no problem...they have one left for 112 pounds or grafite one for 149.99 both you need to add the price of postage.
Let me know, glad to help,it is risky but It could work, I don't know how custom is going to be...
If you pay by card or transfer it should convert your USD automatically...by me I payed by Euros no probs
 
Last edited:
magictorrent,
  • Like
Reactions: Delow317
Top Bottom